Exactoserve

Positive Displacement Injectors (PDIs) deliver a fixed quantity of oil at the outlet connection during each discharge. This discharge can be monitored visually by an indicator pin mounted at end of injector. Lubricant flow at the outlet end of the injector causes the red indicator pin of the PDI indicator to pop up through the cap to show delivery. A decrease in line pressure will allow the spring-loaded indicator pin to reset itself in the indicator body until the next lubrication cycle.

APPLICATION
PDI indicators may be installed on any PDI cyclic operation system.

SYSTEM REQUIREMENTS
System must build up a line pressure to 200 psi (14 bar) min. A pressure relief device must be used in the system to permit a pressure drop to approx. 5-10 psi (0.3-0.7 bar) and allow the PDI to fully reset.

	FL Series injectors - FL Series injectors are rugged devices that are manufactured of carbon steel with zinc surface protection and Viton® seals. They operate under high pressure and in extreme environments up to 350 degrees Fahrenheit. They can be mounted in any position.
	BM-B - A versatile lubricator that can be used with positive displacement injector (PDI), series progressive or dual line systems
404 - Flyer: FL Series  414 - Brochure: ExactoServe Components